Details
FLUXO 6 – Fluorescent Magnetic Particles in Petroleum Carrier Fluid for Magnetic Particle Inspection
FLUXO 6 is a high-performance suspension of fluorescent magnetic particles in a petroleum-based carrier fluid, specifically designed for magnetic particle inspection (MPI). It provides superior sensitivity, optimal particle distribution, and exceptional visibility under UV light, making it suitable for detecting fine surface and subsurface discontinuities in ferromagnetic materials. It complies with multiple international standards and meets nuclear quality specifications.
Packaging
Available in the following packaging options:
- Aerosol 500mL
- Weight: 0.6 kg
- Dimensions: 6.5 × 6.5 × 24 cm
Specifications & Standards
FLUXO 6 complies with major international and industrial standards for magnetic particle inspection:
AMS 2641 Type 2
Vehicle, Magnetic Particle Inspection, Petroleum Base.
NF EN ISO 9934-2
Compliant with ISO 9934-2 requirements for magnetic particle inspection products.
AMS 3044E
Magnetic Particles, Fluorescent, Dry Powder – for high-sensitivity inspection applications.
AMS 3045D
Magnetic Particles, Fluorescent, Wet Method, Oil Vehicle.
ASTM E1444-01 – Section 5.8
Conforms to ASTM specifications for magnetic particle testing procedures.
ASME Boiler & Pressure Vessel Code
Section V, 2004 Edition – approved for inspection of pressure vessels.
RCC-M Edition 2000 – Tome III
Complies with § MC 5135 “Liqueurs magnétiques” for nuclear quality inspection.
Low in Sulphur & Halogens
Meets nuclear quality requirements for low contamination levels.
ASTM SE-709
Ensures compliance with ASTM SE-709 standards for magnetic particle testing.
Technical Characteristics
| Parameter | Specification |
|---|---|
| Performance | 70 mm on reference block type 2 |
| Aspect & Colour | Red suspension |
| Flash Point | > 80°C |
| Particle Size | D50% between 3 and 7 µm; D10% > 1.5 µm; D90% < 40 µm |
| Fluorescence Coefficient | β ≈ 2.5 cd·W⁻¹ |
| Corrosion Test | Level 0 (according to ISO 9934-2) |
| Density (15°C) | 815 g·cm⁻³ |
| Settlement Rate (1 hour) | Minimum 0.1 ml/100 ml |
| Performance Evaluation | Tested on reference block type 2 according to ISO 9934-2. The signature length should not be lower than 25 mm on both right and left sides. |
* Data represent typical values. For continued quality verification, performance can be tested periodically using the reference block type 2 as per ISO 9934-2 guidelines.
View more about FLUXO 6 Fluorescent Magnetic Ink on main site