Elcometer 2410 Viscosity Cup Standard Calibration Oils
Category: Viscosity & Flow Measurement
Specifications
Kuala Lumpur | Selangor | Shah Alam | Klang | Petaling Jaya | Subang Jaya | Cyberjaya | Rawang | Kajang | Bangi | Port Klang | Pulau Indah | Johor Bahru | JB | Pasir Gudang | Pengerang | Kulai | Batu Pahat | Muar | Kluang | Melaka | Bukit Rambai | Sungai Udang | Masjid Tanah | Alor Gajah | Nilai | Seremban | Senawang | Ipoh | Taiping | Penang | George Town | Batu Kawan | Bayan Lepas | Bukit Mertajam | Perai | Kulim | Sungai Petani | Kuantan | Gebeng | Kemaman | Kuala Terengganu | Kota Bharu | Kuching | Bintulu | Miri | Sibu | Kota Kinabalu | Labuan | Brunei
Calibration Oils | Viscosity Standard Fluids | Reference Oils | Viscosity Calibration Fluids
Viscosity cup calibration | Instrument verification | Quality assurance testing | Reference standard validation | Measurement accuracy control
Calibration method | Reference viscosity measurement | Standard fluid comparison | Equipment verification testing
Laboratory testing | Paint & Coatings | Chemical industry | Quality control laboratories
Details
The Elcometer 2410 Viscosity Cup Standard Calibration Oils are used to check the viscosity cup’s calibration and certify it for ISO purposes.
Standard oils have a specific drain time, dependent upon the viscosity cup type (Ford, Shell, Zahn etc.) and the orifice or cup number used.
To check the viscosity cup, use the standard viscosity oils in place of the liquid and measure the drain time.
Specific calibration oils can only be used with specific flow and dip cups. Please use the table below to determine which calibration oil is required with each cup, or contact Elcometer. Viscosity oils are supplied in ½ litre (1 pint) bottles.
View more about Elcometer 2410 Viscosity Cup Standard Calibration Oils on main site